C&c Cage Stand

Pemblebee

Pemblebee

Junior Guinea Pig
Joined
Sep 3, 2017
Messages
67
Reaction score
132
Points
200
Location
Brighton, Sussex
Get a cage stand she said, it will be easy she said.

*Throws connectors out the window in a fit of rage*
:D

When you have some connectors on their side and some flat they don't seem to fit together to make a square. One corner never reaches the connector. But I have 200 cable ties at the ready! This thing will get built:gp:
 
:)) Cage issues? Just look at those little furry faces when you are frustrated... they will make you happy again. Good luck!
 
sport_billy said:
:)) Cage issues? Just look at those little furry faces when you are frustrated... they will make you happy again. Good luck!
Click to expand...

The cage went together no problem. Then I thought it would be a bright idea to make a stand for it. But I bought them from a different place and the connectors are much harder to push together.
 
Pemblebee said:
The cage went together no problem. Then I thought it would be a bright idea to make a stand for it. But I bought them from a different place and the connectors are much harder to push together.
Click to expand...

I had some really tough connectors absolutely nightmare to fit together

I needed to 'Hulk up' as seen below to fit them with superhuman strength
wm18rock.jpg
 
I need to down a can of spinach I think!
I have already cut my fingers twice as I my hand slipped when pushing them on. But it is now at 3 squares long so halfway there!
 
:) We need photos of the finished stand!

Good luck!
 
Put it on a table!

wgozf8.jpg


Those c and c connectors are really swear worthy. One day I will have wood and plexiglass.
 
I feel your pain and am in the exact same situation at the moment.
I also have 2 slightly different grid (and connector) sizes and after holding up quite well for 6 months the connectors are popping off left right and center.
It's driving me crazy, so next week I will get some tables and am going to attempt to build the entire cage with cable ties only.
 
Mine is in a roof room so the ceiling slopes quite low where they are so having it on a table would be too high as I also have a lid (to keep the cat out) so also need height for that to open. Once I find some decent sized short/coffee tables I will defintely get some.
 
eileen said:
@flowerfairy please can i ask where you purchased your tables from?ive a stacking c and c cage and it is bowing,and the connectors are breaking under the strain .
Click to expand...
Mine isn't on a table yet @eileen but i have sized it up and will be getting a selection of Linnmon table tops from Ikea.
The sizing works pretty well with C&C's and they aren't too expensive. Plus then I get to choose the leg length I want.
 
You must log in or register to reply here.
Back
Top