• PLEASE NOTE - the TEAS facebook page has been hacked, take extreme care when visiting the page, for further information visit here

How long is this in length?

Status
Not open for further replies.
Joined
Dec 29, 2010
Messages
129
Reaction score
0
Points
0
Location
Birmingham
A 4x2 C&Ccage? How much in metres - just thinking about correx :)
Omg, the title sounds so stupid - ignore that please, how long is this in length? I sound so dumb, no i meant in metres LOL
 
Well, one would be just long enough and plenty wide enough but there wouldn't be much 'side' to it so you would find hay and poop everywhere :) I'd get two and put them side by side that way the cage would have deep sides (you'll probably need to cut it down a bit)
 
If you phone thonestopplastic shop they do bigger sheet'sbut not sure how much more i used the smaller sheet's and used 4 to make this
FILE0129.jpg


two 2x4 with 2x2 kitchen
 
That looks so cute :) I think I might come and pinch your supply of grids!
 
Each grid measures 14inches, so it is bigger than 120cm x 60cm

Add 12 inches to the length and width for cutting dimension

Add 12 inches to the length and width for a 6 inch wall all the way round. This gives you the outer dimensions to cut. If the cage is going against a wall, you may want to make the back wall 12 inches high to help prevent hay spillage. In that case, you'll add a total of 18 inches to the original measurement from above, for one 12" side.
So,using the above measurements, you should get:

53" x 39" for a 2 x 3 grid cage
68" x 39" for a 2 x 4 grid cage
83" x 39" for a 2 x 5 grid cage
96" x 39" for a 2 x 6 grid cage
(96" is a full sheet length-8 feet)

Taken from http://www.guineapigcages.com/howto.htm

:)p
 
Status
Not open for further replies.
Back
Top