Runaround instructions/screws, washers etc

E

eksarahw

Junior Guinea Pig
Joined
Aug 10, 2022
Messages
42
Reaction score
24
Points
175
Location
East Kilbride
Hi everyone, we finally got our two little sister pigs 2 weeks ago, Wendolyn and Beth. They’re settling in well to their shed and one is definitely the boss, that’s been decided!
I wanted to ask if anyone had instructions or knew which parts I should have to fit some runaround doors. I was lucky to find a secondhand set of clover doors and tunnel locally but there’s a few screws, nuts and washers missing, can anyone help at all?

I have 4 long screws, 2 nylon nuts, 1 wing nut and 3 chunky clear acrylic washers…. I need to fit one side to a run and one side to the shed so need .quite a few mor bits and bobs to make it work!
thanks in advance 😊
 

Attachments

  • image.webp
    image.webp
    33.2 KB · Views: 1
If you look on their website there are instructions on how to put it together. I got some nuts at a local hardware shop, their locking nuts are okay but not if you want to take the door off and put it on a new run, we struggled to get them unlocked. I was going to say you can buy spare parts on their website but just checked and had a shock to see they have closed down. I've got a spare 5mm spacers, some metal rings, some bolts and some door keys, I don't use those as I only use the doors to block off one run from the other when it's time for the piggies to go back indoors. I also have a spare copy of the how to sheet if you need it but it's easier to understand the video. Watch the video and let me know what you need, you can PM me your address. I hope the link works, if not you can google it! https://www.bing.com/ck/a?!&&p=560f...ucnVuYXJvdW5kLmNvLnVrL3BhZ2VzL2hvdy10bw&ntb=1
 
Hi there piggieminder 😊 thanks for getting in touch!
Yes I saw that they closed a few months back, sad eh? I’d been eyeing up their tunnels and set ups for ages as well..
I did get in touch with them on the off chance they might be able to advise me on parts but they sort of pointed me in the direction of B&q etc.
I’ve watched the videos a few times, thanks so much for the link also. Oh the 5mm spacer sounds good, I would happily pay for any spare bits and bobs you have as it could take a bit of searching. Thank you so much for your help!
 
I’m not sure how to PM, sorry, never done that before…tried clicking your profile name but it said there was a privacy issue/problem…
 
eksarahw said:
I’m not sure how to PM, sorry, never done that before…tried clicking your profile name but it said there was a privacy issue/problem…
Click to expand...
If you can't see (or use) "send a message" when you tap the little envelope between your avatar and the bell on the top bar, it will be because you haven't yet reached the threshold at which you can initiate a PM conversation - that's to keep spammers away. @piggieminder can start one with you however so you can reply.
 
Qualcast&Flymo said:
If you can't see (or use) "send a message" when you tap the little envelope between your avatar and the bell on the top bar, it will be because you haven't yet reached the threshold at which you can initiate a PM conversation - that's to keep spammers away. @piggieminder can start one with you however so you can reply.
Click to expand...
Thank you qualcast&flymo. Xx
 
You must log in or register to reply here.
Back
Top